Product review

What’s included and construction
This jacket consists of a foam core sealed between two layers of highly reflective radiant barrier foil. The package ships with the insulated wrap plus adhesive seam tape and the basic supplies required for installation. No fiberglass content — the material is non‑toxic and not a respiratory irritant.

Performance and sizing
The blanket advertises an R‑value of approximately 5.1 and is intended to reduce standing heat loss by as much as 40% in many installations. It is sized for typical residential tanks up to 50 gallons; depending on how it’s applied, there is often enough material to cover larger tanks (some users report being able to wrap tanks up to 80 gallons with different cutting approaches).

Thermal, safety and durability specs
Contact temperature rating ranges from about −60°F to 180°F (−51°C to 82°C). Water vapor transmission measures roughly 0.02 perms. Puncture resistance is rated near 60 lbs./in. The material shows no significant linear shrinkage, retains pliability without cracking, and resists mold and mildew growth. Flame spread and smoke development were tested to ASTM E84‑08 standards (flame spread near 0; smoke development around 40) and the product carries a Class A/Class 1 fire rating. Reflectivity is high (about 95%) with low emittance (~0.04). It also meets motor vehicle safety standard 302 for surface burn rate.

Use and benefits
Designed to be installed around gas or electric water heaters, the jacket wraps the tank and is secured with the included tape. Installation can be completed with basic hand tools; no special protective clothing is required because the material is non‑fibrous. Benefits include reduced standby heat loss, quieter operation from foam‑core sound dampening, and a long service life; the manufacturer notes the unit is made in the USA and built for durability. Typical users report recovering their investment via energy savings in a matter of months.

Pros

High reflectivity and R‑value for radiant heat reduction
Non‑fibrous, non‑irritating foam core construction
Includes tape and accessories for DIY installation

Cons

Can be awkward to wrap solo around a full tank
May require trimming for larger or unusual tank shapes
Some installation patience needed for a tight fit

VerdictA durable, reflective jacket that reduces heat loss and can pay for itself in a few months for many households. The laminated foam core delivers an R‑value around 5.1 and blocks radiant heat while remaining non‑fibrous and non‑irritating to handle. It’s straightforward to fit to gas or electric tanks and includes the tape and accessories needed. Wrapping a tank alone takes some patience, but resul

Reviews

his wife 4/5

Clear instructions

Easy enough to apply following the directions. Waiting to see the impact on our gas usage.
Eric 5/5

Fits well

Sized appropriately and performs as expected.
Casual Surveyor 5/5

Quick to put on

Excellent material and more than enough to do a complete wrap. Took roughly 30 minutes to install and should save on energy bills.
I contreras 5/5

Enough material for two small tanks

Plenty of silver foil to cover two 40‑gallon tanks if laid out carefully.
jerry foster 5/5

Everything included

Very pleased — the package contained all parts required for the install.
joellen nesteruk 5/5

As advertised

Installation was simple and the package included all the tape. It matches the product description.
Greg Norman 5/5

Straightforward product and fit

My 40‑gal tank sits under the house where mice used to nest in traditional fiberglass. This foil‑backed jacket avoids that problem. Everything needed was provided. Tip: secure the first panel with tape while trimming the second so the fit stays snug when working alone.
AY 5/5

Very effective insulation

Wrapping single‑handed is a bit fiddly, but after a couple days the water stayed noticeably hotter and I even had to lower the thermostat. Good value overall.

Comments

No comments yet.

his wife 4/5

Clear instructions

Easy enough to apply following the directions. Waiting to see the impact on our gas usage.

Eric 5/5

Fits well

Sized appropriately and performs as expected.

Casual Surveyor 5/5

Quick to put on

Excellent material and more than enough to do a complete wrap. Took roughly 30 minutes to install and should save on energy bills.

I contreras 5/5

Enough material for two small tanks

Plenty of silver foil to cover two 40‑gallon tanks if laid out carefully.

jerry foster 5/5

Everything included

Very pleased — the package contained all parts required for the install.

joellen nesteruk 5/5

As advertised

Installation was simple and the package included all the tape. It matches the product description.

Greg Norman 5/5

Straightforward product and fit

My 40‑gal tank sits under the house where mice used to nest in traditional fiberglass. This foil‑backed jacket avoids that problem. Everything needed was provided. Tip: secure the first panel with tape while trimming the second so the fit stays snug when working alone.

AY 5/5

Very effective insulation

Wrapping single‑handed is a bit fiddly, but after a couple days the water stayed noticeably hotter and I even had to lower the thermostat. Good value overall.